Know Your Pressure Washer - Snapper 2650 PSI Instrucciones De Uso

KNOW YOUR PRESSURE WASHER
-___Read this user's manual and safety rules before operating your pressure washer.
............................. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Spray Gun
Spray Tips
Nozzle Extension with
Quick Connect
Recoil Starter
Fuel Tank
Choke Knob
Throttle Level
"i )
,. High Pressure Hose
Oil Fill Cap/Dipstick
High Pressure Outlet
& Water Inlet
Air Filter
Chemical Injection
Siphon/Filter
\\
Air Filter -- Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125 °- 155°EWarm water will
discharge from pump onto ground.This system prevents
internal pump damage,
Chemical Injection SiphonlFilter -- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choice Knob -- Prepares a cold engine for starting.
Fuel Tank- Fill tank with regular unleaded fuel.Always leave
room for fuel expansion.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet--To connect high pressure hose.
Pump equipped with
Automatic Cool Down System
Nozzle Extension with Quick Connect --Allows you to
switch between four different spray tips.
Oil Fill Cap/Dipstick -- Check and fill engine with oil here.
Pump -- Develops high pressure,
Recoil Starter -- Use for starting the engine manually,
Safety Goggles (not shown) --Always use the enclosed
goggles or other eye protection when running your
pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger loci<.
SprayTips -- Chemical injection, 0% 15°, and 40°: for various
high pressure cleaning applications.
Throttle Lever--Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet -- Connect garden hose here.