Insignia NS-R5100 AV Digital Home Theater Receiver
7 Turn the MASTER VOLUME dial or press the
VOLUME
/
level.
-OR-
Press the MUTE button to turn the sound off.
MUTE flickers on the display. Press the
MUTE button again to turn the sound back
on.
To adjust the tone:
1 Press the TONE MODE button to enter the
tone mode. The tone mode is displayed for
several seconds.
Note
When EXTERNAL IN is selected as an input
source, you can not select the tone mode or adjust
the tone.
2 Press
or
to select the tone mode.
Note
Each time you press these buttons, the tone mode
changes as follows:
• OFF: To listen to a program source without the
tone effect. DIRECT appears on the display.
• ON: To adjust the tone to your taste. DIRECT
disappears from the display.
buttons to adjust the sound
OR
OR
www.insignia-products.com
3 With the Tone mode set to ON, press the
or
.
Note
Each time you press these buttons, the tone mode
changes as follows:
• BASS
• TRBL
• TONE ON
4 Press
or
Notes
• The tone level can be adjusted within the range
~
of -10
+10 dB.
• In general, we recommend the bass and treble
to be adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage
your speakers.
• To complete tone adjustment, or if the tone
display disappears, repeat this procedure.
Surround sound
This receiver incorporates a sophisticated digital
signal processor that allows you to create
optimum sound quality and sound atmosphere in
your personal home theater.
Surround modes
DTS Digital Surround
DTS Digital Surround (also called simply DTS) is
a multi-channel digital signal format which can
handle higher data rates. Discs bearing the
include the recording of up to 5.1 channels of
digital signals, which can be generally thought to
provide better sound quality due to the lower
audio compression required.
It also provides wide dynamic range and
separation, resulting in magnificent sound.
DTS and DTS Digital Surround are registered
trademarks of DTS, Inc.
Dolby Digital
Dolby Digital is the multi-channel digital signal
format developed by Dolby Laboratories. Discs
bearing the
DOLBY
D I G I T A L
5.1 channels of digital signals, which can
reproduce much better sound quality, spatial
expansion, and dynamic range characteristics
than the previous Dolby Surround effect.
OR
to adjust the tone.
includes the recording of up to
11