Acoustimass ® Module Status Indicator; Error Messages - Bose SoundTouch 130 Guia Del Usuario

Display
8 CENTER LEVEL
9 SURROUND LEVEL
10 LANGUAGE
11 SET OPTICAL INPUT
12 SET COAXIAL INPUT
13 SET ANALOG INPUT
14 ADAPTIQ
15 PAIR ACOUSTIMASS
16 FACTORY RESET

Error messages

Display
ERROR
Cannot find Acoustimass
ERROR
Cannot find soundbar
<SOURCE>
No signal
SIDE AUX
Nothing connected
ERROR
Call Bose
Acoustimass
The status indicator on the back of the Acoustimass module provides information
on system activity.
Indicator activity
Amber
Blinking amber
Slow blinking amber
Red
Getting System Information
System state
Increases or decreases the level of dialogue for movies and
TV.
NOT AVAILABLE.
Changes the language on the console and the ADAPTiQ audio
calibration.
Sets the optical connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
Sets the coaxial connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
Sets the analog connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
Starts the ADAPTiQ audio calibration process.
Reconnects the Acoustimass
Sets the System menu and the ADAPTiQ audio calibration to
the factory settings.
System state
The Acoustimass
the console.
The soundbar is not connected to the console.
The source is not connected to the console, or the source is
connected to the console and powered off.
The source is not connected to the
console.
Call Bose customer service. Refer to the contact sheet
®
in the carton.
module status indicator
®
Acoustimass module state
Connected to the console.
Disconnected from the console.
Available to make a wireless connection to the console.
System error.
module to the system.
®
module is not connected to
®
connector on the
English - 33