Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12 | English
Safety Notes
en
Working safely with the measuring
tool is possible only when the oper-
ating and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. Never make warning
labels on the measuring tool un-
recognisable.
SAVE THESE INSTRUCTIONS.
Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those men-
tioned here, can lead to dangerous radiation
exposure.
The measuring tool is delivered with a warn-
ing label in German language (marked with
the number 11 in the representation of the
measuring tool on the graphic page).
IEC 60825-1: 2007-03, <2 mW, 635 nm/650 nm
Laser Radiation
Do not stare into beam
Class 2 laser product
Before putting into operation for the first
time, attach the supplied sticker in your
national language over the German text on
the warning label.
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam yourself.
This measuring tool produces laser
class 2 laser radiation according to
IEC 60825-1. This can lead to
persons being blinded.
Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and
reduce colour perception.
1 609 929 R07 | (9.10.08)
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not allow children to use the laser measur-
ing tool without supervision. They could unin-
tentionally blind other persons or themselves.
Functional Description
Intended Use
The measuring tool is intended for determining
and checking horizontal and vertical lines as well
as plumb points.
The measuring tool is suitable exclusively for
operation in enclosed working sites.
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool on
the graphic page.
1 Laser line
2 Exit opening for laser beam
3 Plumb beam
4 Automatic levelling indicator
5 Operating-mode indication
6 Operating mode button
7 On/Off switch
8 Tripod mount 1/4"
9 Latch of battery lid
10 Battery lid
11 Laser warning label
12 Tripod*
13 Wall holder*
14 Unlocking buttons of the holding plate*
15 Holding plate of the wall mount*
16 Fastening screw for wall mount*
17 1/4" screw of wall mount*
18 Laser viewing glasses*
19 Protective case
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Publicidad
Tabla de contenido
