Climate Control Status; Heated/Cooled Seats And Heated Steering Wheel Activation; Heated/Cooled Seats And Heated - Metra 99-6526 Instrucciones De Instalación

Climate Control Status

ATTENTION: The rear-view camera Input is used to display the climate control
status and personalization menu. If the aftermarket radio does not have a screen
with a rear-view camera Input, then there will be no visualization of the climate
controls status and personalization menu, which makes adjusting the climate
control impossible. An externally mounted screen could be substituted
in this situation.
• The use of the factory controls will interrupt the visual screen on the radio,
and show the status of the changes being made instead.
Note: For some aftermarket radios, there is a delay switching to the
"Rear-view Camera Input".
Note: This menu has a timeout feature; after 5 seconds of no climate control
use, the visual will return back to the radio.
99-6526

Heated/Cooled Seats and Heated

Steering Wheel Activation
Make sure the gear in the top left corner is highlighted with the white square,
and press "Enter".
This takes you into the personalization menu, scroll down using the arrow til
"Customize" is highlighted and press "enter".
Note: If the option did not exist from the factory, activating the buttons will not
add the option to your car. If the option was not factory installed and the button is
activated, the High-Low options cannot be changed, the option will remain off.
10
The interface will auto-
detect the heated seats on
the vehicle. However, if the
vehicle has cooled seats or
heated steering wheel, those
options must be selected in
the customization menu to be
activated on the HVAC screen.
To do this you must first
press the "Menu" button to
activate the HVAC screen so
it remains active during the
process.
Continued on the next page