ausdom H8 Manual Del Usuario página 5

either with your device or another headphone. Repeat
the same steps above (holding down the power button
for 5-6 seconds until the LED indicator flashes blue and
red alternately) on the second headphone.
4. Once both headphones are powered on and in pairing
mode, they should automatically identify each other and
connect together. This may take from a few seconds to
10 seconds. Once successfully paired, one headphone
voices "Connected, left channel" and the LED flashes
blue and red alternately, which means the primary
headphone. The other headphone voices "Connected,
right channel" and the LED turns to solid blue, which
means secondary headphone.
5. Start Wireless function of the device and select the
"AUSDOM H8" to pair the primary headphone.
6. Once successfully paired, the LED turns to solid blue.
You will hear "Second device connected".
The secondary headphone
STEP 1
Connect two headphones
to each other
5-4 Connecting to paired devices
1. AUSDOM H8 will pair with the last paired device
automatically when turning on. But for some computers
or laptops you will need to manually pair every time.
2. If you use ShareMe function to turn the primary
headphone on firstly, it will be connected to the paired
device automatically. Then turn the secondary one on,
the secondary one will automatically connect to the
primary one.
The primary headphone
EN-4
The Wireless-enabled
device
STEP 2
Pair the primary headphone
to the device