Packing List; Diagram - Segway S-PLUS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
2

Packing List

Steering Bar
(RF locating system integrated)
Mainframe
Camera
Your personal
photographer!
Camera sold separately.
When unpacking your Segway S-PLUS, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After
verifying that all components are present and in good condition, you can assemble your new Segway S-PLUS.
Please retain the box and packaging materials in case you need to ship your Segway S-PLUS in the future.
Always power off your Segway S-PLUS and unplug the charge cable before assembling, mounting accessories, or cleaning.
04
User Materials
USER MANUAL
QUICK START
LIMITED WARRANTY
Accessories Box
Accessories in the Box
M5 Screws x2
Cap x1
Hex Wrench x1
Valve Stem
Extension x 1
Remote Control x 1
USB Charge Cord x 1
Charger x1
3

Diagram

Lock
Bluetooth
Speed Limit
Dashboard
Power Level
Turn ON/OFF. The Segway S-PLUS will automatically power OFF when idle for 10 minutes, or when
Power Button
laid down (horizontal) for over 30 seconds.
Enable Lock Mode via the App. The Segway S-PLUS and app will vibrate and sound an alarm if
Lock
anyone moves it. The remote control will also alarm if it is powered on and within range (65 ft. [20
meters]) of the Segway S-PLUS.
When the App is connected to the Segway S-PLUS, this icon will glow steadily. When Bluetooth is
Bluetooth
enabled—but not connected to a smart phone—this icon will blink.
Enable and adjust Speed Limit Mode via the App. When the icon is illuminated, Speed Limit Mode is
Speed Limit
on. This speed limit can be adjusted in the App. As you approach the speed limit, the Segway
S-PLUS tilts back. When you reach the speed limit, the Segway S-PLUS beeps.
Indicates the remaining battery life. Each block equates to approximately 20% power level. When
the battery is nearly empty this icon blinks and the Segway S-PLUS beeps, indicating that you need
Power Level
to charge your Segway S-PLUS. Your Segway S-PLUS will gradually reduce the max speed limit as
the power level gradually decreases. When less than 10%, the speed will be limited to 6.2 mph (10
km/h). Use the App to view the remaining power and estimated remaining range.
Camera Interface
Handle and Knee Pads
Steering Bar
Storage Compartment
Headlight
Fender
Power Button
Charge Port
Valve Stem
Battery Cabin
Foot Mat
Wheel
Wheel Light
05

Publicidad

Tabla de contenido
loading

Tabla de contenido