Transmitter Recognition Procedure; Using The "First Transmitter" (Empty Memory) - Nice TTD0110 Instrucciones Y Advertencias Para La Instalación Y El Uso

ON
CONNECT POWER
LAMP ON
LAMP OFF
DESIRED VALUE
FOR THE BRIGHTNESS OF THE LAMP
PRESS BRIEFLY
PRESS AND HOLD THE BUTTON
ON THE TRANSMITTER
RELEASE THE BUTTON
ON THE TRANSMITTER
1
PRESS AND HOLD THE BUTTON ON THE
2 TRANSMITTER AT THE SAME TIME
RELEASE THE BUTTON ON THE TRANS-
3
MITTER AT THE SAME TIME
- - -
TRANSMITTER BUTTONS
4
1
- -
TRANSMITTER BUTTONS
1 2
...
BRIEFLY PRESS THE DESIRED BUTTON
3
2
ON THE TRANSMITTER
VIEW/SELECT
3
4
WAIT FOR...
4
WAIT FOR A PRECISE TIME
2 seconds
6 – English
BRIEFLY PRESS THE EXTERNAL BUTTON
PRESS AND HOLD THE EXTERNAL BUT-
TON
RELEASE THE EXTERNAL BUTTON

4.3 - Transmitter recognition procedure

4.3.1 - Using the "First Transmitter" (Empty Memory)

This procedure allows you to associate a transmitter to the dimmer in
"Mode 1".
OFF
01.
2 seconds
within 5
02.
seconds
03.
2
green LED: memorising OK
2
red LED: memorising NOT CONCLUDED
in this case, repeat the procedure from the beginning
ON
2
Green LED
for 8 seconds