Craftsman 580.768330 Manual De Instrucciones página 9

• Remove the blackchemical nozzle fromthe nozzle
extension.
• Select a ndinstall t hedesired highpressure nozzle
following theinstructions " Howto Usethe Nozzles".
• Keepthe sprayguna safedistance fromthe area
youplanto spray.
• Applya highpressure spraytoan small a reaand
thencheckthe surface fordamage. I f nodamage
is found, y oucanassume it is okaytocontinue
cleaning.
• Startatthetop oftheareato berinsed, w orking
downwithsameoverlapping s trokes usedfor
cleaning.
• Theuseof a brushmaybehelpful o n somehardto
cleansurfaces.
Automatic Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray
gun, circulating water in the pump can reach a
temperature between 140-145°F. When the water
reaches this temperature, the automatic cool down
system engages and cools the pump by discharging
the warm water onto the ground. This system prevents
internal damage to the pump. Once the pump has
cooled, it will stop discharging.
NOTE: This is not a leak. Do Not return the pressure
washer to the store.
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean water inlet screen
on quick-connect.
Check high pressure hose.
Check detergent hose.
Check spray gun and assembly for leaks.
Purge pump of air and contaminants.
ENGINE
Check oil level.
Change engine oil.
Service air cleaner.
Service spark plug.
Service spark arrester
Prepare for storage.
HOURLY OPERATING
INTERVAL
Before Each
Use
Every 50
Hours or
Yearly
Every 100
Hours or
Yearly
xt
X
X
X
X
X
X*
X**
X
X
Prepare unit for storage if it is to
remain idle for longer than 30 days.
SERVICE DATES
1 Clean if clogged. Replace if perforated or torn.
* Change oil after the first (5) operating hours and every 50 hours or every year, whichever occurs first,thereafter. Change
sooner when operating under dirty or dusty conditions.
** Replace more often under dirty or dusty conditions.