Product Specifications - Honeywell HZ-420 Serie Manual De Instrucciones

TROUBLESHOOTING
If your 360º Ceramic Surround Heater shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
• Be sure it is plugged in and that the electrical outlet is working.
• Check for any obstructions. If you find an obstruction, turn the heater OFF (
• Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug
the heater in and follow the OPERATION instructions

PRODUCT SPECIFICATIONS

Model(s) HZ-420 Series, HZ-430 Series
Unit dims HZ-420 Series 8.75" x 8.75" x 17.25" (22.2cm x 22.2cm x 43.8cm)
HZ-430 Series 8.75" x 8.75" x 18.5" (22.2cm x 22.2cm x 47cm)
Amps 12.5
Unit Voltage 120V, 60Hz
Max Watts 1500
Max BTUs 5118
Operation Cost*
To estimate the cost to operate this heater, multiply the watts used by .001 convert into kilowatts
used. Then, multiply the kilowatts used by your local kilowatt electric rate and the length of time you
run the heater. For example, if your electric rate is $.1290**per kilowatt hour and you ran this heater
in constant high mode (1500 watts) for 4 hours, it would cost you $.77 cents to run the heater (1500
watts x 4 hours x .001) x $.1290kwp = $.77 cents).
NOTE: The Low setting does not require as much electricity to operate. It is more energy efficient and
may be a better option if you are concerned about the higher power consumption when the heater is on
the High setting.
*Calculation (Total Wattage x .001) x Cost per Kilowatt Hour = Cost to operate
**Average Retail Price of Electricity to Ultimate Customer by End-Use, US Energy Information
Administration, August 2016.
CONSUMER RELATIONS
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at:
www.HoneywellPluggedIn.com/heaters
Please be sure to specify a model number.
6
) or ( ) and unplug it.