Brother QL-570 Guía De Configuración Y Uso página 22

16
STEP2 Installing the software
6
After restarting the computer,
connect the USB cable to the
machine.
As the caution label is put on the USB
port of the machine, remove it and
then connect the USB cable.
7
Connect the USB cable to the USB port of Macintosh
Press ON/OFF button ( ) of the machine to turn on the power.
When connecting the machine to Macintosh
connected correctly. At that time, connect the machine directly to the USB port
of Macintosh
8
(For Mac OS
OS ® X is installed, and click in order of [Applications]-[Utilities]-
[Printer Setup Utility].
(Mac OS
Preferences], and click [Print & Fax]. Then click
9
(For Mac OS
the screen.
Choose "QL-XXX" from the list and click [Add] again to add the printer to the Printer
Setup Utility.
(Mac OS
(Mac OS
[Add] to add the printer to the [Print & Fax].
10
When the screen returns to Printer List /
Print & Fax screen, check the "QL-XXX"
is added, and close Printer List / Print &
Fax screen.
Now you can use the machine.
For details on software, see the P-touch Editor Help.
®
.
® X 10.3.9 - 10.4.x) Double click the drive where Mac
®
X 10.5) Click in order of [Apple menu]-[System
® X 10.3.9) Click [Add] and choose USB at the top of
®
X 10.4.x) Go to step 10.
®
X 10.5) Choose "Brother QL-XXX" from the list and click
USB port
USB cable
® .
®
via USB hub, it may not be
.
Power port
Power cord