Brother QL-570 Guía De Configuración Y Uso página 43

Problem
The icon of Add-in feature is not
displayed on Microsoft
Cutter error
The printed barcode cannot be
read.
I want to reset the printer/delete
the data transferred from PC.
(QL-580N only)
I want to cancel the current
printing job. (QL-580N only)
• Is Microsoft
• Is Microsoft
®
Microsoft
®
Word. Due to limitation of the program, the Add-in feature of
®
Microsoft
®
Microsoft
• If the cutter error occurs, keep the DK roll compartment cover
closed and press ON/OFF button. The cutter moves back to the
normal position and turns the machine OFF automatically. After
the machine is OFF, inspect the cutter unit and remove the
paper jam.
• Depending on the type of scanner, if it cannot be read, try using
a different scanner. We recommend printing the barcode with
Print Quality options set to "Give priority to quality". (To change
the Print Quality options, open printer properties from [Control
Panel]-[Printer and FAX] and click [Printing Preferences...]
button in the [General] tab.) Also, set the label vertical to the
print head as shown below.
Print head
• To reset the machine, press and hold the ON/OFF button to
switch the machine OFF. Then, hold down the ON/OFF button
for two seconds. Continue holding down the ON/OFF button,
and press the CUT button six times. The machine will then
reset. All the transferred data from PC will be deleted and
reset the machine to factory setting.
• Make sure that the printer is ON, and press ON/OFF button.
Solution
®
Word started up from Microsoft
®
Word chosen for the editor usually used for
®
Outlook ?
Word is unable to use with above settings. Quit
®
Outlook , and restart Microsoft
Label
® ®
Outlook ?
®
Word.
Recommended
print direction
37
STEP
1
STEP
2
STEP
3
STEP
4