D-Link DCS-6915 Guia De Instalacion página 6

Hardware Installation
STEP 6
Insert the power connector into the opening on the cap.
STEP 7
Connect the 3-pin connector to the slot on the camera enclosure. the
connector will lock into place.
STEP 8
Connect the power cable to the power adapter.
STEP 9
Connect one end of the Cat 5 ethernet cable to the rJ-45 connector
of the camera enclosure, and the other end of the cable to your
network.
STEP 10
Insert the microSd card into the slot.
STEP 11
plug the power cable into a wall outlet.
6