Ninja BL830 Guia Del Usuario página 14

Assembly and Use of the Pitcher - cont.
USE
Fig. 6
9 Review warning and caution statements on
page 12 before proceeding.
10 Turn the Variable Speed Dial to speed 1.
(Fig. 6) The power indicator light ( ) will now
turn on.
To start the blender, press the "Start/Stop/
Pulse" toggle up to start processing. Slowly
increase to desired speed.
NOTE: As a safety feature, the power
indicator light ( ) will flash and the
motor will not work if the pitcher and lid
are not installed correctly.
NOTE: If you need to Pulse ingredients press
down on the toggle in short intervals.
11 When you have reached your desired
consistency, reduce speed slowly and stop the
unit by pressing up on the Start/Stop/Pulse
toggle and wait for the blade assembly to
stop turning. (Fig. 7)
12 Turn the pitcher counter clockwise to remove
and then lift off the base. (Fig. 8)
13 Open the pour spout to empty liquid contents.
14 For thicker consistencies, remove the lid
and Top Stacked Blade Assembly carefully
(by its shaft), then empty contents from the
container. To remove the lid, press the release
button on the lid and pull the lid handle up to
a 90° angle and lift the lid off the pitcher.
13
1.877.646.5288
REMOVAL
Fig. 7
CAUTION: Never insert your hands in the
pitcher as the blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher.
15 Make sure that the unit is unplugged when
not in use.
TIPS:
• Use low speed settings (1-3) when blending
drinks and other blended items.
• Use medium speed settings (4-6) when
frozen blending, ice crushing or grinding dry
ingredients.
• Use high speed settings (7-10) when
creating purees such as sauces, dips and
restaurant quality glazes. Top blades are
needed to power through tough ingredients
like ice, solid fruits and vegetables. If silky
smooth results are desired, push down on
the power toggle to turn off the power,
carefully remove the Top Stacked Blade
Assembly , replace the lid and continue
processing using only the bottom blades.
• For softer ingredients, the bottom fixed
blades are enough to fully process in one
step.
• For thicker consistencies, remove the lid and
the Top Stacked Blade Assembly carefully
(by the shaft), then empty the contents from
the pitcher.
Fig. 8