Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Ninja BL830 Guia Del Usuario

Ocultar thumbs Ver también para BL830:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing
any attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher,
Nutri Ninja
Cup and blade assemblies in
®
warm, soapy water. When washing the blade
assemblies, use a dish-washing utensil with
a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to
avoid contact with sharp edges. Rinse and air
dry thoroughly.
Dishwasher: The containers, lids,
blade assemblies and attachments are
all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed
from the containers before placing in the
dishwasher.
WARNING: Handle the Stacked Blade
Assembly and Nutri Ninja Blade Assembly
with care when washing, as the blades
are sharp. Contact with the blades' edges
can result in laceration.
3 Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
HOW TO STORE
1 Store the Ninja Ultima
upright with the blade assembly inside the
corresponding container with the lid secured
on top. Do not place anything on top. Store
the rest of the attachments in a safe place
where they will not be damaged and won't
cause harm.Loosely wrap the power cord
around the motor base.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with
the blade assembly attached.

RESETTING THE MOTOR THERMOSTAT

The Ninja Ultima Dual Stage Blender features
a unique safety system which prevents
damage to the unit's motor and drive
system should you inadvertently overload
your appliance. If the appliance is being
overloaded, the motor will stop and the
power indicator light will flash. To reset the
appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and ensure
that no food is jamming the cutting blades or
attachments.
3 Allow the appliance to cool for approximately
15 minutes.
4 Re-install the container onto the base,
carefully re-insert the top blades (if using) and
re-plug the appliance into the electrical outlet.
5 Proceed to use the appliance as before,
making sure not to exceed the recommended
maximum capacities.
Dual Stage Blender
®
ninjakitchen.com
16

Publicidad

Tabla de contenido
loading

Tabla de contenido