ENGLISH
Operation
Normal playback
• The layer for top priority playback after the disc is loaded can be set.
• The layer set for top priority playback upon shipment from the factory (default setting) is the Super Audio CD (stereo) layer.
SUPER AUDIO CD
SET UP
POWER
Opening and closing the disc holder and
loading discs
1
POWER
Press the
2
Press the
button.
5 5
• Pick up the disc carefully so as not to touch the
signal surface and hold it with the labeled side facing
up.
• With the disc holder fully open, set the disc in the
disc holder.
• Set 12 cm discs in the outer disc guide, 8 cm discs
in the inner disc guide.
3
Press the
5 5
button.
The disc is automatically loaded.
The disc holder closes automatically if the
is pressed.
switch to turn on the power.
Outer disc guide
12cm disc
Disc holder
/
button
1
3
OPEN/CLOSE
NUMBER
SUPER AUDIO CD
SETUP
NOTE:
• If your finger should get caught in the disc holder when it
closes, press the
5
Setting the top priority playback layer for
Super Audio CDs
1
POWER
Press the
2
Check that no disc is loaded.
If the layer is switched while the disc is being loaded,
the playback layer switches for that disc, but the top
priority playback layer setting itself does not change.
3
SUPER AUDIO CD SETUP
Press the
switch to the layer you want to set.
When a disc is loaded after the setting has been made,
the contents recorded on the set layer are displayed.
If a disc that does not contain the layer set for top
priority playback is loaded, the contents recorded on
another layer are displayed automatically.
This setting is stored in the memory and is not cleared
even when the disc holder is opened or closed or the
power is turned off. To change the setting, repeat the
procedure above.
7
ENGLISH
OPEN / CLOSE
OPEN / CLOSE
DIRECT
DIRECT
PROGRAM
PROGRAM
CALL
CALL
1
2
3
4
5
6
7
8
9
0
+10
+10
CLEAR
CLEAR
+10
SUPER
SUPER
AUDIO CD
AUDIO CD
SETUP
SETUP
DISPLA
DISPLAY
TIME
TIME
TITLE
TITLE
ARTIST
ARTIST
RANDOM
RANDOM
REPEAT
REPEA
button.
RC-997
switch to turn on the power.
button and