Connections; Connections To The Analog Output Terminal; Connections To The Digital Output Terminal (Coaxial/Optical) - Denon DCD-2000AE Instrucciones De Operación

Connections

Connections to the analog output terminal

• Use the included RCA pin-plug cord to connect the left (L) and right (R) output terminal (ANALOG OUT) of the DCD-2000AE
to the CD, AUX or TAPE PLAY left (L) and right (R) input terminal of the amplifier.

Connections to the digital output terminal (COAXIAL/OPTICAL)

NOTE:
• With Super Audio CDs, no digital signals are output.
• Digital signals are output from optical terminal and coaxial terminal with parallel.
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Dust cap
Remove the dust cap, line up the cable in the proper directly,
then insert it securely as far as it goes.
Line up in proper direction
6
ENGLISH
L
R
OUT
NOTE:
• Store the dust cap in a safe place, and be careful not to
lose it.
When not using the terminal, attach the cap to protect
the terminal from dust.
ENGLISH
Connections
Amplifier
AUDIO IN
L
L
R
R
CD Recorder/
D/A Converter/
MD Recorder/
etc.
COAXIAL
IN
OPTICAL
IN
Signal direction
AUDIO Signal
IN