HP PL5072N Guia Del Usuario página 22

The Standard Definition Input (S-Video In,
or Video In) connectors do not pass high
definition TV signals.
To connect the set-top box:
CAUTION: Unplug power for the TV and all
connected components before connecting
the set-top box.
1
Connect the set-top box input source cable(s) to
the rear of the TV using one of the connector sets:
Digital High Definition Input: Connect
■
an HDMI cable to any of the HDMI
connectors: HDMI 1, HDMI 2, or HDMI 3
(select models only).
Or
Connect a DVI-D cable and DVI-to-HDMI
converter (from digital, high-definition cable or
satellite set-top box with a DVI connector) to
HDMI 1, and left-right audio cables to HDMI
Audio In L and R.
12
HP HDTV User's Guide
n
c
High Definition Input: Connect component
■
video cables and left-right audio cables to the
Component connectors:
1: Component In Y, Pb, and Pr, and
■
Audio In L and R
Or
2: Component In Y, Pb, and Pr, and
■
Audio In L and R
Standard Definition Input: Connect an
■
S-Video cable, or a composite video cable,
and left-right audio cables:
AV1: S-Video In or Video In, and Audio In
■
L and R
Or
AV2: S-Video In or Video In, and Audio In
■
L and R
L R
Y Pb Pr