Turning On The Tv; Turning The Tv On And Off - HP PL5072N Guia Del Usuario

Turning the TV On and Off

The TV has a Power button on the right side of the
panel. You can also use the Power button on the
remote control to turn on the TV.
Pressing the Power button turns the TV either on or off.
A Power light
B Remote control sensor
C Power button
The Power light shows whether the TV is on or off.
Power light
Lights blue
Lights amber
Off
Flashing amber or
flashing blue

Turning On the TV

POWER
C
A B
TV status
TV is off but plugged
into the power source.
TV is powering on
(light turns off after
about 30 seconds).
TV is on, or the AC
power cord is
disconnected.
Startup diagnostics are
in progress or an error
occurred.
n
The initial setup starts when the TV powers
on for the first time. If the TV has been
turned on before, the Setup Wizard does
not start. To start the Setup Wizard from
the onscreen display (OSD) Setup menu,
see "Starting the Setup Wizard" on
page 41.
When you will not be using the TV for an extended
period of time, press the Power button to turn off the
TV, and then unplug the AC power cord.
Using the remote control to turn the TV
on or off
Point the remote control at the remote control sensor on
the front of the TV, and press the remote control Power
button. The TV turns on or off.
A
SAP
Sound Picture
MTS
Source
OK
back
Info
Last Ch+
Ch-
CC Sleep Fav
1 2 3
4 5 6
8 9
7
0 Enter
A Remote control Power button
19
Turning On the TV