How To Charge Your Ipad; How To Listen To Your Non-Docking Portable Device; How To Maintain Your Speaker System - Altec Lansing MP450 Guia Del Usuario

How to Charge Your iPad

Whenever your iPad is docked and your Altec Lansing Octiv Theater
speaker system is plugged into an AC outlet, your iPad is charging (until
fully charged)—even if the speaker system is switched off.
How to Listen to Your non-docking
Portable Device
If you have a non-docking portable audio or video device, you can enjoy
it through your Altec Lansing Octiv Theater speaker system as well. Just
connect it via the AUX jack. Here's how:
1
Locate a 3.5mm stereo cable
(not included).
2
Plug one end of the stereo cable into
your device.
Your device should have either a
headphone or LINE OUT jack for you to
plug into.
3
Plug the other end of the stereo
cable into your speaker system's
AUX jack.
The AUX jack is located on the back of
the unit.
4
Turn on your speaker system.
5
Turn on your device.
6
Find your desired song or video.
7
Start playing the song or video.
8
Adjust the volume.
NOTE You may need to adjust the device volume also. Your device's
volume should be set to approximately ¾ volume.

How to Maintain Your Speaker System

Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a piece of cloth or other protective material when
placing your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.
9