Deleting A Macro; Configuring Favourite Channels (Fav Ch); Setting Up Favourites - Silvercrest SFB 10.1 C3 Manual De Instrucciones

SilverCrest SFB 10.1 C3
If you do not press the corresponding number button within
5 seconds after you press the
control backlight flashes 3 times.
The same happens if the button you press after pressing the

Deleting a macro

1. Press and hold the
2. Press
3. Press
"MACRO6" and press
4. Press
display reads "SURE DELET".
5. Press
macro is shown again on the display.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Configuring favourite channels (FAV CH)

This function is supported in the modes TV, DSAT, CBL and AUX (if the
AUX device button has been programmed accordingly) only You can
save preferred channels as favourites.

Setting up favourites

1. Press the device button for the device that you wish to program.
2. Press and hold the
3. Press
4. Press
The display reads FAV-CH01.
5. Press
CH15") and press
6. Enter the channel that you wish to save. You can save up to 6 entries
(digits or -/- -) per channel preset. The entered digits are not shown
on the display. When you have finished, press
input. The display reads "SUCCESS". Then the next favourite
channel preset appears on the display. Press
a different favourite preset.
7. After entering 6 buttons for one preset, it is saved automatically
when you press the 6
the next favourite channel preset appears on the display. Press
8. If you select a favourite preset that is in use already, your entry
overwrites any existing channel.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
86 - English
button has no macro assigned to it.
, select "MACRO" and press
, select "MACRO1" (or "MACRO2".....
, select "DELETE" and press
to confirm. The display reads "DELETED". The selected
, select "FAV CH" and press
, select "CONFIGURE" and press
, select "FAV-CH01" (or "FAV-CH02"..... "FAV-
to confirm. The display reads "SELECT KEY".
th
button. The display reads "SUCCESS". Then
to select a different favourite preset.
button for at least 3 seconds.
to confirm. The display reads "SET UP".
button for at least 3 seconds.
button, the remote
to confirm.
to confirm. The
to confirm.
to confirm.
to save your
to select