3. Pull pusher back again to release and carefully allow pusher to slide forward until it makes contact with the
nails.
NOTE: Use only nails recommended for use in BOSTITCH Framing nailers or nails which meet the BOSTITCH
specifications.
FASTENER DEPTH CONTROL ADJUSTMENT
The Fastener Depth Control Adjustment feature provides control of the
nail drive depth from flush with or just above the work surface to
shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting
any parts disassembly and before changing the work
contact element adjustment.
Rotate depth control wheel to give the desired depth of drive.
NOTE: Rotate depth control
wheel to give the desired depth
of drive.
-8-