Transport And Storage; Maintenance, Service And Repairs - WELDY miniwelder geo2 Instrucciones De Funcionamiento

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product, in
the version as brought into circulation through us, fulfils the requirements of the following EC directives
Directives:
Harmonised standards:
Kaegiswil, 22.10.2018
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse!

Transport and storage

To protect the device from damage, dirt, dust and moisture, always store and transport unit in the original box.
The wedge (9) must be cooled down
for transport.

Maintenance, service and repairs

• The complete machine should be cleaned and placed in a dry place if it is not used.
• For PVC welding, the adhesions on hot wedge should be cleaned off after each weld.
• Attention: For welding of material such as PVC that produces corrosive gas use a stainless steel hot
wedge (optional accessory).
• Repairs may only be carried out by local Weldy partners. Usage is limited to the use of original accesso-
ries and original spare parts from Weldy.
Warranty
• The guarantee or warranty rights that were agreed upon by the local Weldy partners apply for this device. In the
case of guarantee or warranty claims, all manufacturing or processing errors shall be repaired or replaced by
the local Weldy partners at their own discretion. The guarantee or warranty claims must be proven by a purcha-
se receipt or a delivery note. Hot wedges shall be excluded from warranty obligations or guarantees.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
16
2006/42, 2014/30, 2014/35, 2011/65
EN ISO 12100, EN 55014-1, EN 55014-2, EN 6100-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO Christoph Baumgartner, GM
Do not store any flammable materials in
the transport box