Ferroli HRT-176RS Manual De Instalacion Y Uso página 15

TECHNICAL SPECIFICATIONS
RECEIVER
Linked with transmitter via RF: frequency 868 MHz
EN
Power rating: 230 VAC ± 10%, 50 Hz
Power consumption: 1,2 W
Relay switching capacity:
• Min 1mA,
• Max 2A at 30 VDC
• Max 0,25A at 230 VAC
TRANSMITTER
Linked with receiver via RF: frequency 868 MHz
Power rating: 2 x 1,5AAA - Alkaline batteries
Temperature setting: 3°C to 35 °C in 0.2°C increments.
Display temperature: -9,9°C to 50°C in 0.2°C increments.
Hysteresis OFF: factory set at 0,4°C (boiler switch OFF at
0,4°C above the target)
Hysteresis ON: factory set at 0,2°C (boiler switch ON at
0,2°C below the target)
Install transmitter and receiver in an environment with nor-
mal pollution level. Radio range 40 m in free space, (the
range can be altered depending on the installation condi-
tions and on the electromagnetic environment).
The manufacturer reserves the right to change specifica-
tion without prior notice - Consumers statutory rights are
not affecte.
15