Advanced Shooting - Olympus CAMEDIA C-5060 Manual Básico

ADVANCED SHOOTING

SEQUENTIAL SHOOTING
There are 4 sequential shooting modes: high speed sequential shooting,
sequential shooting, AF sequential shooting and auto bracketing. Sequential
shooting modes can be selected from the DRIVE mode menu.
Sequential shooting cannot be performed when the record mode is set to
TIFF.
Drive mode
o
Shoots one frame at a time when the shutter button is pressed.
(Normal shooting mode, single-frame shooting)
i
Pictures can be taken at a faster speed than normal sequential
shooting. The sequential shooting speed varies depending on the
record mode setting.
Approx. 4 frames at 3 frames/sec. (3 frames in SHQ ENLARGE
SIZE mode)
j
Focus, exposure and white balance are locked at the first frame.
Approx. 10 frames at 1.4 frames/sec. (in HQ mode)
k
Adjusts the focus 1 frame at a time. The AF sequential shooting
speed is slower than for normal sequential shooting.
7
When auto bracketing is set, the exposure is changed
automatically for each frame while holding down the shutter
button. The exposure differential and number of frames can be
selected in the menus. The focus and white balance are locked at
the first frame.
gMENU FUNCTIONS - Mode menus
METERING
There are four ways of measuring the brightness of a subject.
Select the way best suited to your porpose.
Digital ESP metering
Spot metering
Multi-metering
: Meters the center of the subject and the
surrounding area separately.
: Exposure is determined by metering within the
metering target area. In this mode, a subject
can be shot with optimal exposure regardless
of the background light.
: Meters the brightness of the subject at up to 8
different points to set the optimal exposure
based on the average brightness. This method
is useful with a high contrast subject.
En
En 37