Using More Than One Bluetooth Phone; How To Initiate A Call; How To Answer A Call While Talking On The Other Paired Phone - Plantronics Voyager PRO Guia Del Usuario

Ocultar thumbs Ver también para Voyager PRO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Headset Controls and Indicators
Action
Redial
Double-tap call
control button.
Voice-activated redial
Press call control
(if supported by phone)
button for 1 second.
Call indicator LED
With headset powered
(enable/disable)
on, press power,
volume + and - buttons
simultaneously for 1
second.
Reconnect after leaving
Tap call control button.
Bluetooth range range for
more than 30 seconds
10
DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed.
Indicator LED
Tone
None
Double low tone
None
Single low tone (phone
may then prompt you to
say a command)
Turn indicator on: blue glow
Single low tone
increases for 2 seconds.
Turn indicator off: blue glow
fades for 2 seconds
Single blue fl ash
Single low tone

Using More Than One Bluetooth Phone

Plantronics Voyager PRO supports multipoint
technology, which allows you to use one
headset with two different Bluetooth mobile
phones. To pair your headset to a second
phone, see "Pairing Your Headset" on page 4.

How to Initiate a Call

The headset initiates or redials a call on the
phone that most recently made an outgoing call.
To use the second phone, initiate the call using
the controls on that phone. The second phone
forms an active link with the headset.
NOTE
The headset cannot place a current call
on hold while answering a call from the second
phone.
How to Answer a Call While Talking on
the Other Paired Phone
To answer a second call, the current call must
be terminated or transferred back to the fi rst
phone. To transfer the call, see "Headset
Controls" on page 8.
NOTE
If you choose not to answer the second
call, and you have voice mail on the second
phone, the call will go to voice mail.
1
Terminate the current call.
Tap the call control button.
2
Answer the second call.
Tap the call control button again.
TIP
To avoid issues switching between calls,
use the call control button on the headset rather
than your phone controls.
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido