Maintenance; How To Replace The Filter Bag - Oreck ELEVATE Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance - How To Replace The Filter Bag
WARNING:
DAMAGED, LEFT OUTDOORS, OR DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1-800-406-2005 PRIOR TO CONTINUING USE.
WARNING:
NOT USE VACUUM WITHOUT FILTRATION BAG IN PLACE.
WARNING:
FILTRATION BAG AND CAUSE IT TO BURST EVEN THOUGH IT IS ONLY PARTIALLY FULL. CHANGE THE BAG OFTEN WHEN CLEANING THIS
TYPE OF MATERIAL.
1
Unzip the Filtration
Bag Case completely.
3
Gently pull the cardboard
collar on the filtration
bag up to engage the self
sealing lock and remove
from the bag dock.
10
Discard.
IF APPLIANCE OR CHARGER IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED,
TO REDUCE THE RISK OF PERSONAL INJURY, BEFORE CLEANING OR SERVICING. DO
VERY FINE MATERIALS, SUCH AS FACE POWDER OR CORNSTARCH MAY SEAL THE
2
Pull the cardboard
collar on the filtration
bag downward to
release the bag dock
from the dock port.
4
Slide a new filtration
bag collar firmly into
the bag dock ensuring
all hooks on dock door
are inserted on the
cardboard collar.

Publicidad

Tabla de contenido
loading

Tabla de contenido