Caring For The Heart Rate Monitor; Linking To Fitness Equipment; Hrm-Run Specifications - Garmin HRM-Run Manual De Instrucciones

3
Wait 30 seconds.
4
Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
5
Replace the back cover and the four screws.
NOTE: Do not overtighten.
After you replace the heart rate monitor battery, you may need
to pair it with the device again.

Caring for the Heart Rate Monitor

You must unsnap and remove the module before washing the
strap.
A build up of sweat and salt on the strap can decrease the
ability of the heart rate monitor to report accurate data.
• Go to www.garmin.com/HRMcare
instructions.
• Rinse the strap after every use.
• Machine wash the strap after every seven uses.
• Do not put the strap in a dryer.
• When drying the strap, hang it up or lay it flat.
• To prolong the life of your heart rate monitor, unsnap the
module when not in use.

Linking to Fitness Equipment

ANT+ technology links your heart rate monitor to fitness
equipment so you can view your heart rate on the equipment
console.
• Look for the ANT+LINK HERE logo on compatible fitness
equipment.
• Go to www.garmin.com/antplus

HRM-Run Specifications

Battery type User-replaceable CR2032, 3 volts
Battery life 1 year (1 hour per day)
Water rating 3 ATM*
NOTE: This product does not transmit heart
rate data while swimming.
Operating temperature From -20° to 60°C (from -4° to 140°F)
range
Radio frequency/ 2.4 GHz ANT+ wireless communications
protocol protocol
*The device withstands pressure equivalent to a depth of 30 m.
For more information, go to www.garmin.com/waterrating.
NOTICE
for detailed washing
for more linking instructions.
Limited Warranty
The Garmin standard limited warranty applies to this accessory.
For more information, go to
.html.
www.garmin.com/support/warranty
3