LG 42LH90QR Manual De Uso página 80

MFL58486305-Edit2-en- 4/29/10 4:52 PM Page 78
BLUETOOTH
Disconnecting the Bluetooth headset
1
MENU
2
ENTER
3
ENTER
When requesting to connect to TV from the Bluetooth headset
Even if it is not in the registered device list, depending on a headset, it works if connected as shown below
when headset power off.
When the Bluetooth menu is "On" and there is a connection request from
the headset, this message is dispalyed.
Not all headsets support this feature.(Refer to the user manual of the
applicable Bluetooth headset.)
1
ENTER
!
NOTE
LG recommends the following headset models.
G G
-Sony Ericsson : HBH-DS980, Motorola : S9,
Motorola : S605, Jabra : BT620S
The stereo/mono headsets officially certified to be
G G
Bluetooth compatible can be searched and connect-
ed.
The stereo/mono headsets that support A2DP or HSP
G G
functionality can be connected.
If the surrounding environment of the TV is as fol-
G G
lows, the device may not be searched or connected
properly.
-If there is strong electromagnetic interference.
-If there are many Bluetooth devices in the area.
-If the headset is turned off, not in place or has an
error.
-Because products such as microwave oven, wireless
LAN, plasma light, gas range etc., use the same fre-
quency range, they can cause communication errors.
Only one Bluetooth device can be connected at a
G G
time.
78
Select B B L L U U E E T T O O O O T T H H .
Select B B l l u u e e t t o o o o t t h h H H e e a a d d s s e e t t .
Disconnect the Bluetooth headset.
ENTER
Select Y Y e e s s or N N o o .
Do you want to use your headset?
?
Yes
Connection that is lost due to the TV being turned
G G
off etc. will not be automatically recovered. Try con-
necting the applicable device again.
Some operations can be slower while operating the
G G
headset.
Even if you choose simplink Home Theater after using
G G
the headset during Simplink operation, the unit will
not automatically switch to Home Theater speakers.
When the headset connection continuously fails, pair
G G
the device one more time.
The audio quality of mono headsets will not
G G
be as good as that for stereo headsets.
Mono headsets may suffer from noise as the dis-
G G
tance from the TV increases, because they use a
different transmission method compared with
stereo headsets.
When a Bluetooth headset is in use, the
G G
Volume +/- and MUTE keys do not work, and
the Audio menu returns to the default value
and is disabled.
No