Safety Definitions
• Save all instructions
Safety Alert Symbols:
The information listed below should be read and understood by the operator . We utilize the symbols below to allow
the reader to recognize important information about their safety .
Indicates an imminently hazardous situation which, if not avoided, will result in death or
DANGER
serious injury .
Indicates a potentially hazardous situation which, if not avoided, could result in death or
WARNING
serious injury .
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
CAUTION
moderate injury .
Indicates a practice not related to personal injury which, if not avoided, may result in
NOTICE
property damage .
Safety Warning Symbols:
The following symbols can be found on your Auger . Carefully read and understand their meaning .
Look for this symbol to point out important safety precautions . It means: Attention! Become
Alert! Your Safety Is Involved.
Read, understand and follow operator's manual before operating this machine. Failure to
follow directions could result in serious injury .
Extremely hot surface . Do not touch a hot muffler, gear box or cylinder, you may get burned .
These parts get extremely hot from operation and remain hot for a short time after the unit is
turned off .
Control and Operating Symbols:
Choke Control:
Cold Start
Run/Warm Start
Fuel Primer:
Press 6 times .
Fuel Mixture:
Fuel Mixture
50:1
50:1
Unleaded Gas: 2 Cycle Oil
Caution: Do Not Use Gas
Mix with More Than 10%
(Unleaded Gas : 2 Cycle Oil)
Methanol or Ethanol
Ignition Switch:
ON
ON
OFF
OFF
Questions? Call Toll Free at 1-800-737-2112
EN - 2
Copyright © 2018 MAT Engine Technologies, LLC