1.
Product introductions
1.1. Safety Rules
Please read the manual carefully before using the device. You will receive a lot of information to use this
product correctly and you will prevent incidents. Please keep the manual on a safe place.
This sign warns you about
high voltages, with risk of
electric shock
Caution:
Keep this device far away from liquids. Do not place it on placements close to water like flowers vases,
wash basin, aquariums or pools. A high risk of electric shock exists when water or high humidity filters inside the
devices. Never place other devices on it; they can overheat the devices as well as daring fire risk.
Please read carefully this manual and do not hesitate to contact to professional help if you have any doubt.
1.- Never place the equipment close to hot sources.
2.- Never expose the equipment to temperatures that exceed the level of operation of the device.
3.- Do not expose the equipment to dripping or splashing.
4.- Do not place objects filled with liquids on the equipment.
5.- Respect ventilation slots of this equipment. Avoid covering them with any object.
6.- Keep clean and without obstacles a minimum radius of 15 cm around this equipment.
7.- Avoid place with possibilities of spilling liquids on the inside of the device, and with important changes of
temperature.
8.- Use the device only in moderate climates (not in tropical climates).
9.- When you take the device from a cold to a warm place, please wait until the device gets the same
temperature as the new environment, in order to avoid problems of humidity condensation.
10.- Never open the equipment yourself due to electric risk. In case of problems, check with qualified technicians.
11.- Never, under any circumstances, open the equipment connected to the electrical net.
12.- During the handling it is better to disconnect the equipment of the electrical net.
13.- Respect the electricity security rules during the assembling. Use materials that obey the current law.
14.- The connecting plug must be accessible in a fast and simple way to have a fast disconnection.
15.- Never touch the plug with wet hands. Also, disconnect always the device before handling the connections.
16.- Never put any heavy object over the device, as it could get damaged.
If the equipment is going to remain some time without use, it is recommendable to disconnect it from the
17.-
electrical net.
Within the warranty time all the repairing processes should be done by Fte Maximal technical staff.
18.-
Otherwise, the warranty voids.
NOTE: This user's guide is adapted to software version v.1.6.0 of Atlas 64 dated 28/08/2019.
For future software updates, you can download the user's guide from the following website:
http://www.ftemaximal.com/
All right of technical changes and mistakes are reserved.
Quick installation Guide ATLAS 64
CAUTION
RISK OF ELEKTRIC SHOCK
DO NOT OPEN
Caution: Do not open the housing
of this device. Repairs can only be
made by professionals authorized
by Fte maximal. If not, warranty will
not be valid anymore.
Opening the device housing will mean a warranty void.
R
This sign informs about
special information which is
important to know.
1
-
-
ATLAS 64 Version en_1.1
Fte maximal