FTE Maximal ATLAS 64 Manual De Instalación Rápida página 27

6.1.7. Device Settings
This menu allows save and load a configuration in the device.
6.1.8. Reset Device
In this option, it is possible choose the type of reset. In the list Select reset level choose an
option and press the button Apply to confirm.
6.1.9. Logout
Close the current session.
6.2. Menú Input
6.2.1. LNB
Allow change the title and supply settings of the inputs.
Label: Edit the text to do a friendly identification of the input.
Voltage: Choose between OFF, 13V and 18V.
All right of technical changes and mistakes are reserved.
Quick installation Guide ATLAS 64
In the section Upload Setting File (exp) press the
button Select file. A dialog is showing and it must be
used to choose the settings file with extension exp.
After confirm the file in the dialog window, press the
button import to upload the new configuration to the
device. Wait until the process finish.
Press the button Export, to save the current devices
settings in a file.
Options available:
Reboot device: Restart the device.
Reset IP settings: Load the factory settings for IP
configuration
Reset Device Settings: Delete all device settings
except the IP configuration, password and the
device configuration.
Factory Reset: Load the factory default. The device
configuration is not changed after the factory default
Reset CAM: Force a reset to the CAM
8
- -
ATLAS 64 Version en_1.1 Fte maximal