Web Interface - FTE Maximal ATLAS 64 Manual De Instalación Rápida

Quick installation Guide ATLAS 64
Configuring the protocol TCP/IPV4 to with a fixed address
The set before the IP static address of Atlas 64 headend with a fixed IP address for example
192.168.5.101.
Set the IP address of the computer in the same IP range and subnet of the headend. In the
example, the computer will be configuring in the IP address 192.168.5.77. Remember copy the
current configuration before to do any change, if need restore the current configuration of the
Ethernet interface.
Check the radio button "Use the following IP address" and enter an IP and subnet mask.
You can leave the Default gateway and DNS settings empty.
Press OK and close the windows.
6.

Web interface

http://start
Open the web browser and type in the address bar.
The Web interface of Atlas 64 will be showing and you must be show the overview.
Select in the left menu the option Login.
In the dialog Authentication required type the password. By default the password is admin and
confirmed pressing the button Log In.
After that show the full menu can change the headend configuration.
5
- -
All right of technical changes and mistakes are reserved. ATLAS 64 Version en_1.1 Fte maximal