Deleting The Sensor - SOMFY Sunis Indoor Wirefree RTS Guia De Instalacion

Deleting the sensor

Deleting the sensor
• Place the RTS motor/radio receiver into programming mode
(see point A on page 10).
• Briefl y press (0.5 seconds) the sensor programming button (1).
the shutter/blind will briefl y move up and down.
the sensor is deleted.
> 2 seconds
Fig. 1
Copyright © 2008 Somfy SAS. All rights reserved.
(must be on)
Fig. 2
1
0.5 seconds
Fig. 2
Page 11