• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Remove used batteries promptly.
• If the unit is not going to be used for a long period of time, remove batteries to
prevent damage due to possible battery leakage.
NOTe: Please recycle or dispose of batteries per local regulations.
wARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
Problem Solving
In case of difficulty:
1. Move your scale to a location where it will not be bumped. If your scale is bumped while being
activated or while in use, an inaccurate reading may occur. Initialize the scale as described in
FIRST TIME SETUP #4.
2. Make sure the battery is properly installed.
Note: Special Displays
Incorrect initialization; initiate the scale as described in First Time Setup #4
Unstable weight; begin again
Overload; remove weight immediately
Low battery; replace
battEry prEcautions
7