Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Information
Your HealthStation has a lithium battery installed that will provide a long life of
operation when used in a typical household. Under heavy usage the battery may
eventually need to be replaced.
Low Battery
Your HealthStation is equipped with a low battery indicator. Replace the battery when
"Lo" is displayed or readings grow dim or become irregular.
Battery Replacement
1. Use 2 CR 2032 lithium batteries only.
2. Open battery compartment on bottom of unit by pushing tab in direction of "open"
arrow and lifting up hinged lip.
3. Remove old batteries from compartment. Apply pressure to double tab to the right
of the battery (Figure 6). Battery will pop out.
4. Place the new batteries into battery compartment with the "+" sign up. Slide battery
under bottom lip and press down until battery clicks in place.
5. Close the battery cover. Be sure it clicks shut.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Remove used batteries promptly.
• If the unit is not going to be used for a long period of time, remove batteries to
prevent damage due to possible battery leakage.
BATTERY PRECAUTIONS
5
Figure 6
Publicidad
Tabla de contenido
