Draught Problems - Hergom SHELBURNE Libro De Instrucciones Para La Instalación, Mantenimiento Y Uso

If these surfaces are suitably protected, the distances may be reduced. (Fig.-15)
These same distances may be respected when the covering of walls or nearby areas
is susceptible to damage or deformity by the temperature (varnishes, paints, P.V.C., etc.).
PARALLEL WALLS
Below is a list of the problems common to any type of stove. All of these problems
can be corrected and sometimes only require a small readjustment for the stove to return to
its normal working order.
Remember that time affects the operating of your stove.
If your stove leaks smoke inside the house, the most likely is the following:
-If your chimney is newly built:
a) The draught is insufficient.
b) The section or height is not appropriate.
c) There is a bottleneck somewhere in the chimney.
-If the chimney already existed:
a) The chimney is partially blocked by soot.
b) There is internal or external breakage where air is getting in.
c) There is less section or height than required by the new appliance.
SHELBURNE STOVE
DISTANCES FROM
COMBUSTIBLES SURFACES

7.- DRAUGHT PROBLEMS

SLANTING WALLS
Fig. 15
41