Cassette Recorder - Philips AZ 1120 Manual Del Usuario

CD PLAYER
To review your set programme
• In the stop position, press and hold down CD MODE for more
than one second.
– The display shows all your stored track numbers in sequence.
• To play your programme press PLAY•PAUSE 2;.
Erasing a programme
You can erase the contents of the memory by:
– pressing the CD door open;
– moving the source selector position;
– pressing STOP 9 twice during playback/ in the stop position.
• The display shows 'no' briefly and
when the programme is cancelled.
PLAYING A CASSETTE
1. Set the source selector to TAPE.
2. Press STOP•OPEN 9 / to open the cassette holder and
insert a cassette.
3. Press the cassette holder shut.
4. Press PLAY 1 to start playback.
5. Adjust the sound using the VOLUME and DBB controls.
6. To interrupt playback press PAUSE ;. To resume, press the key
again.
7. By pressing 5 or 6,fast winding of the tape is possible in
both directions.To stop fast winding, press STOP•OPEN 9 /.
8. To stop the tape, press STOP•OPEN 9 /.
– The keys are automatically released at the end of the tape,
except if PAUSE ; has been activated.
9. With the source selector in OFF/ TAPE position, the set is
switched off when all the cassette keys are released.
8
will disappear
PROGRAM

CASSETTE RECORDER

PROGRAM
CD