Music Player Operation; Button Function - auna iTuner CD Manual De Instrucciones

EN
56

MUSIC PLAYER OPERATION

This function is for more advanced users.
The built-in Music Player allows you to play unprotected audio files (AAC,
MP3, WMA, FLAC) stored on a networked computer. To play music from the
computer, you must setup a shared file or media library on the computer.
Press the MODE button repeatedly to select Music Player mode.
Media Sharing
Ensure that your computer is available on the network, and that your
computer is set up to allow sharing your media folders or files. Check how
to setup a folder for sharing from your computer's instruction manual.
1. During Music Player mode, press the PRESET
Shared media and press the SELECT button to scan for all the available
shared media folders or files.
2. The display will show all found media folders from the network. Press
∧/∨
the PRESET buttons to select the computer that you wish to connect
to.
3. The unit will search for all shared media from the computer.
∧/∨
4. Press the PRESET
then press the SELECT button.
5. This unit cannot access your computer, until your computer allows it.
6. Press the SELECT button to start playback of the desired track..
Function
Button
Press to pause playback or resume normal playback.

/
Press to skip to the previous track.

Press and hold to fast rewind the current track.
Press to skip to the next track.

Press and hold to fast forward the current track.
Repeat Mode
During Music Player mode, press the PRESET
play and press the SELECT button repeatedly to turn repeat play on/off.
Shuffle Mode
During Music Player mode, press the PRESET
play and press the SELECT button repeatedly to turn shuffle play on/off.
buttons and select your desire shared media, and
∧/∨
∧/∨
∧/∨
buttons to select
buttons to select Repeat
buttons to select Shuffle