Setup And Operation - auna Sound Maitre Manual De Instrucciones

SETUP AND OPERATION

Setup network
1. WPS button
[Configuration] > [Network] > [Wi-Fi Network] > [Add/Remove AP] > [Add
AP (WPS button)]
• Press and hold the "OK" button to select.
• Invoke the WPS function of the target Wi-Fi router (see the user manual
of the target Wi-Fi router).
• The radio and the Wi-Fi router will exchange security information to
complete the association process. If the configuration is not done within
one minute, the radio will exit the process and the user is required to
repeat the process again.
• Always place the radio within 2 meters of the Wi-Fi router to ensure
smooth and fast association.
2. Wi-Fi password entry
• When the radio is used the first time (or moved to a new premise), after
the "Boot up and connect to www.skytune.net" message, a prompt to
configure network will pop up. Choose [Yes] by turning the rotary knob
and press "Select". Select [Add/Remove AP], then [Add AP (Scan)] to
scan the air for available Wi-Fi AP. A list of APs with reasonable signal
strength will be shown.
• Choose the target Wi-Fi AP and enter the password (if any).
• To enter the password: Dial to choose the character for the first charater
position, press "OK" to enter and move to the next chracter position and
dial to choose thenext character and press "OK" again. Repeat until the
last character has been entered and then long press "OK" to confirm the
password entry.
• If the password entry is correct, the radio will show "Associating" and
then "Associatiton complete". The radio will automatically connect to
the AP just associated. The radio will then obtain the necessary network
parameter for Interent connection (with DHCP).
EN
21