Start-Up And Operation; Adjusting The Volume - auna Intelligence DAB+ Manual De Instrucciones

EN
24

START-UP AND OPERATION

Power on
• Plug the connector into the side of the unit labeled DC IN and power
supply into the mains.
• Ensure the antenna is extended as far as possible. This will enable you
to get the best signal.
• Switch the button on the side of the unit to "ON", unit will show
"Welcome to Digital Radio", then step into Standby.
Standby and working
Press the "Power" button in standby mode, unit goes into working ; press
the "Power" button in working mode, then go into standby.
Selecting the modes
When radio is turned on, press the "Mode" button repeatedly to switch
between DAB / FM / Bluetooth/WiFi voice recognition mode.

Adjusting the volume

• Turn the "knob" button by clockwise to increase the volume;
• Turn the "knob" button by anticlockwise to decrease the volume;
Mute button.
• In WiFi voice recognition mode, press "Mute" button to forbid the
microphone, the LED lights will become red color. No matter in working
mode or Standby mode and whatever you say, unit won't recognize
your voice and answer any questions.
• While press again "Mute" button, unit will relieve the microphone,
and the red LED lights disappear, that means unit recovers the voice
recognition function.