Receiver Application; How To Select The Sat Source From The Transmitter While Viewing The Program On Tv2 - Winner M532-34 Manual De Empleo

2. Press the TV key under VCR region on the remote (or press the VCR
source
key on the front panel ) into TV mode .
3. Power on the recorder with its own remote controller and press REC to
LED Status ︰The GREEN LED 4 is on.

Receiver Application

1-1. How to select the SAT source from the transmitter while viewing the
program on TV2 ?
Note ︰
The transmitter allows COMPOSITE signals input from the SAT
source, and transmit the signal to the TV 2 on the receiver.
Operation ︰
1. Press POWER key to turn on the Receiver.
2. Power on the satellite receiver :
you can turn it on with its own remote controller from receiver side
and select favorite programs when the RF transmission function is
ON.
3. Press the SAT key under TV 2 region on the remote (or press the TV 2
source
key on the front panel ) into SAT mode .
4. Use your IRD remote controller to operate.
record TV programs.