How To Select The Vcr Source From The Transmitter While Viewing The Programs On Tv2 - Winner M532-34 Manual De Empleo

Note ︰
The transmitter allows COMPOSITE signals input from the AV source, and
transmit the signal to the TV 2 on the receiver.
Operation ︰
1. Press POWER key to turn on the Receiver.
2. Power on the satellite receiver :
you can turn it on with its own remote controller from receiver side
and select favorite programs when the RF transmission function is
ON.
3. Press the SAT key under TV 2 region on the remote (or press the TV 2
source
key on the front panel ) into AV mode .
4. Use your AV source remote controller to operate.
LED Status ︰The GREEN LED 3 is on.
1-4. How to select the VCR source from the transmitter while viewing the
programs on TV2 ?
Note ︰
The transmitter allows COMPOSITE signals input from the VCR source,
and transmit the signal to the TV 2 on the receiver.
Operation ︰
1. Press POWER key to turn on the Receiver.