How To Select The Cable Tv Programs From The Transmitter While Viewing The Programs On Tv2 - Winner M532-34 Manual De Empleo

2. Power on the VCR :
you can turn it on with its own remote controller from receiver side
and select favorite programs when the RF transmission function is
ON.
3. Press the VCR key under TV 2 region on the remote (or press the TV 2
source
key on the front panel ) into VCR mode .
4. Use your VCR remote controller to operate.
LED Status ︰The GREEN LED 4 is on.
1-5. How to select the Cable TV programs from the transmitter while viewing
the programs on TV2 ?
Note ︰
The transmitter allows COMPOSITE signals input from the TV1 source, and
transmit the signal to the TV 2 on the receiver.
Operation ︰
1. Press POWER key to turn on the Receiver.
2. Power on TV Set :
you can turn it on with its own remote controller from receiver side
and select favorite programs when the RF transmission function is
ON.
3. Press the TV key under TV 2 region on the remote (or press the TV 2
source
key on the front panel ) into TV mode .
4. Use your TV remote controller to operate.
LED Status ︰The GREEN LED 5 is on.