Operating Instructions; Setting The Carrier Frequency; Silent Mode; Unlocking The Receiver - Harman AKG DMS800 Modo De Empleo

oPerAting instructions

Carrier frequency

SILENT mode

Unlocking the
receiver
DMS800 MANUAL
8 Operating instructions
8.1

Setting the carrier frequency

The following steps are required to set the carrier frequency:
1. Set the transmitter to SILENT mode (recommendation)
2. Unlock the receiver
8.1.1 Setting the transmitter to SILENT mode
We recommend setting the carrier frequency in SILENT mode (no HF radi‑
ation). This is the only way to avoid "going to transmit" on an unauthorized
frequency and potentially disrupt other radio services or wireless micro‑
phones.
To set the transmitter to SILENT mode, proceed as follows:
Step Description
1 When switching on the MUTE
switch (2), press with the ON/
OFF switch (6) held down at the
same time
The entry RF‑OFF is shown on
the display.
8.1.2

Unlocking the receiver

The receiver is electronically locked to avoid any settings being changed
accidentally. The receiver switches to LOCK mode after approx. 4 minutes
with no button being pressed.
The "LOCK" symbol (D) lights up on the display.
The automatic lock function can be deactivated in the AUTOLOCK sub‑
menu.
84