sAfety And environment
Safety
DMS800 MANUAL
3
Safety and environment
3.1
Safety
•
Protect the equipment against
-
direct sunlight
-
the impact of significant dust and humidity
-
rain
-
vibrations or knocks.
•
Do not spill any liquids on the equipment and do not allow any other
objects to drop through the ventilation slits into the equipment.
•
Do not place any containers filled with liquid on the equipment.
•
The equipment must only be used in dry rooms.
•
The equipment must only be opened, serviced and repaired by
authorized personnel. The equipment contains no user‑serviceable
parts.
•
Before connecting the equipment to power, check that the AC
mains voltage stated on the integrated power adapter (DSR800) is
identical to the AC mains voltage available where the equipment will
be used.
•
Only operate the equipment on a mains voltage between 100 and
240 V AC. Using adapters with different output voltage or current
types may cause serious damage to the equipment.
•
If any solid or liquid should get into the equipment, shut down the
system immediately. Disconnect the power cable (DSR800) from
the power outlet at once and have the equipment checked by our
customer service department.
•
If the equipment is not going to be used for a longer time, discon‑
nect the mains cable (DSR800) from the power outlet. Please note
that if you switch the equipment off while leaving the mains cable
(DSR800) plugged in, it is not fully isolated from the power network.
•
Do not place the equipment near heat sources such as radia‑
tors, heating ducts, amplifiers, etc. and do not expose it to direct
sunlight, excessive dust, moisture, rain, mechanical vibrations, or
shock.
66