Dyna-Glo DGB730SNB Manual De Usuario E Instrucciones De Funcionamiento página 21

Step 20: Unscrew the igniter cap and insert the AAA battery (29) into
the igniter body with positive '+' end facing out. Replace the
igniter cap.
Step 21: Insert the grease pan (22) into position by sliding it in the gas
grill body from the rear (as illustrated) along the rails located
just below the underside of grill body.
NOTE: Grease pan MUST be in position as illustrated below
(grease cup support rails on your left while facing the rear of
the grill).
Insert grease cup (20) into position by sliding it onto the support rails on
the bottom side of grease pan.
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
19
20
29
21
22