Canceling Traffic Announcements
• Press the TA/NEWS button while a traffic announcement is being received
to cancel the announcement and return to the original source.
The announcement is canceled but the tuner remains in the TA mode until the TA/NEWS
button is pressed again.
Adjusting the TA Volume
When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
• Set the volume by adjusting it during reception of a traffic announcement.
The newly set volume is stored in memory and recalled for subsequent traffic announce-
ments.
TP Alarm Function
About 30 seconds after the TP indicator "TP" is extinguished due to a weak signal, a 5 sec-
ond beep sounds to remind you to select another TP or EON TP station.
• If you are listening to the tuner, tune in another TP station or EON TP sta-
tion.
In sources other than tuner, the tuner automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)* seconds after the TP indicator "TP"
disappears from the display.
* Time taken before Seek begins.
TA function ON
TA, AF functions ON
10 seconds
30 seconds
20