Toasting Frozen Bread; Warming Up Already Toasted Bread - Beko TAM 6201 I Manual De Usuario

3 Operation
6. Disconnect the appliance from the wall socket.
If toast slices get stuck in the
toaster, switch the toaster off
immediately by pressing the stop
button (6). Pull the power plug out
of the wall socket. Let the toaster
C
cool down completely. Carefully try
to take the bread out of the toaster
without damaging the sensitive
heating elements and other parts.
Do not use any electroconductive
objects to remove the bread from
the toaster.

3.3 Toasting frozen bread

1. Follow the steps from 1 to 4 of the "Toasting"
section.
2. Press the defrost button (4).
– The indicator lights of the defrost button
(4) and stop button (6) illuminate and the
toasting process begins.
C
When the defrost button (4) is
pressed, the toasting process takes
longer than with normal toasting.
3. The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever (2) springs back up; defrost
button (4) and the stop button (6) lights go
off. The toast slices are pushed upwards and
can be taken out of the toaster.
To cancel the toasting process
C
before it has finished, press the
stop button (6). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
C
After the start lever (2) springs back
up, you can use high-lift function by
pushing the start lever (2) upwards.
Toaster / User Manual
WARNING: Be very careful when
A
taking the toast slices out of the
toaster as the metal parts of the
toaster and also the bread can
become very hot.
4. Disconnect the appliance from the wall socket.
3.4 Warming up already
toasted bread
1. Follow the steps from 1 to 4 of the "Toasting"
section.
2. Press the reheat button (4).
– The indicator lights of the reheat button
(4) and stop button (6) illuminate and the
warming up process begins for 30 seconds.
3. The appliance automatically switches off as
soon as the set degree of warming has been
reached. The start lever (2) springs back up;
reheat button (5) and the stop button (6) lights
go off. The toast slices are pushed upwards and
can be taken out of the toaster.
To cancel the toasting process
C
before it has finished, press the
stop button (6). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
C
After the start lever (2) springs back
up, you can use high-lift function by
pushing the start lever (2) upwards.
Be very careful when taking the
C
toast slices out of the toaster as the
metal parts of the toaster and also
the bread can become very hot.
4. Disconnect the appliance from the wall socket.
9 / 81 EN