Thermador TCM24RS Guía De Uso Y Cuidado página 24

20
Note:
If the appliance has not been used for a
prolonged period (for example, while you
are on vacation), the existing filter should
be rinsed before the first time the appliance
is used again� To do this, simply dispense a
cup of hot water�
Detailed information about the water filter
can be found in the manual supplied with
the filter.
Temperature format
Setting option in "°F" or "°C"�
Volume units
Setting option in "oz" or "ml"�
Switch off after
To set how long the appliance should wait
after the last drink was prepared before it
automatically rinses and switches itself off�
You can specify values from 15 minutes to
8 hours� The factory setting is 30 minutes�
Illumination
Setting the illumination of the beverage
outlet� "On", "When in use" or "Off" can be
selected�
Brightness illumination
Setting the illumination lightness of the
beverage outlet� "Level 1" to "Level 10" can
be selected�
Brightness display
Setting the illumination lightness of display�
Key press sound
Switch the signal tones on or off�
Clock display
Display option for time and date "Off" or
"Digital" (on)� The settings for this can be
changed in the next menu options�
BSH Home Appliances Corporation
Note:
If the appliance is switched off at the
power switch or there is a power failure,
the settings for the time will be lost�
Time of day
Setting for the current time�
Clock format
Setting option in "12hr" (American mode) or
"24hr" (European mode)
Note:
No difference between am and pm�
Transport protection
Service program to prevent frost damage
during transportation and storage�
This program completely empties the
appliance�
● Select "Start" to begin running the
program�
● Empty the water tank and reinsert�
● If available remove the milk container and
close the door�
The appliance automatically empties all its
pipes�
● Empty the drip tray and re-insert�
Beverage info
Display shows how many drinks have been
prepared since its initial use�
● Select "next" to show the information�
Factory settings
Resets your own settings to the condition
when delivered�
● Select "reset" with the K or L arrow
button� The message "Are you sure?"
appears.
● Select either "reset" to confirm or "cancel"
to interrupt�
en